Mars Hydro LED Grow Lights Review

Mars Hydro LED Grow Lights Review

If you’re looking for an affordable LED grow light to complete your grow room setup, then Mars Hydro (or “MarsHdyro” as Amazon spells it) has an economical solution for you. The benefits of LED grow lights are already well known. They’re significantly more efficient than HID lights, producing more viable light per watt than any other technology on the market. This means that you’ll get a better yield than equivalently rated HID lights, and can save money while you’re doing it.
Unfortunately, the primary disadvantage of LED grow lights is the up-front cost. Sure, you’ll save money over time. But indoor grow operations take consistency and patience. It usually takes several months before you’ll begin to see a return. If you’re turned off by the purchase price of LED lighting, you’ll definitely want to check out the Mars Hydro led grow lights. Mars Hydro grow lights has produced a series of grow lights in the course of the past decade. They have a reputation for providing the best deals on the market among growers. In this review, we have gathered Mars Hydro led grow lights from each generation or series. You can see the models in the table below. In this article, we will review each and one of the models featuring in the table, so you can better understand which Marshydro led grow light is best when it comes to the essential features of each series before recommending which to pick when.

Model Name LED diodes/chips Dimensions Veg Footprint Bloom Footprint Fan Latest Price
MarsHydro Mars Series 300w 60 x 5w Epistar 12 x 8 x 3 2 x 2 2 x 1.5 1 Check at Amazon
MarsHydro Reflector Series 480w 96 x 5w Epistar 23 x 13 x 2 2.5 x 3.5 2 x 2.5 2 Check at Amazon
MarsHydro Reflector Series 720w 144 x 5w Epistar 28 x 10 x 2 2.5 x 4.5 2 x 3 3 Check at Amazon
MarsHydro Reflector Series 960w 192 x 5w Epistar 26 x 21 x 2 4 x 4 3 x 3 2 Check at Amazon
MarsHydro Pro II Cree 640 128 x 5w CREE 20 x 13 x 5 4 x 4 2 x 3 2 Check at Amazon
MarsHydro Eco Series 49, 300w 49 x 5w? Epistar 11 x 10 x 3 3.5 x 3.5 2 x 2 1 Check at Amazon
MarsHydro Eco Series 98, 600w 98 x 5w? Epistar 20 x 11 x 3 3.5 x 5.5 2.5 x 4 2 Check at Amazon

MarsHydro – Mars Series 300w Review

Model Name Actual Watts Dimensions (inch) Approximate Veg Footprint (feet) Approximate Bloom Footprint (feet) Recommended Height Latest Price
MarsHydro Reflector Series 480w 60 x 5w Epistar 12 x 8 x 3 2 x 2 2 x 1.5 18 Check at Amazon

MarsHydro Mars300 offers a well-balanced spectrum that incorporates a broad range of wavelengths: 430~440nm, 450~475nm 620~630nm, 650~660nm. These wavelengths are within the PAR portion of the full spectrum, which means the light promotes photosynthesis, making the fixture suitable for growth. The light spectrum is equally blue and red. This can either be good or bad, we will explain why at the end. But first, let us have a look at some pros and cons.

The Good

  • Single cooling fan and heatsinks dissipate excessive heat.
  • EPIstar diodes and Zener protection = longer durability.
  • Cheap

The Bad

  • Small size = Small coverage
  • 12 months warranty – rather short

 

Recommended for

The grow light has a well-balanced red/blue spectrum, which makes the grow light not best for any phase in particular, but still applicable throughout the plants full lifecycle. You should not expect the richest yield with this grow light.

We do recommend Mars 300 for the beginner. Especially, if it is your first-time indoor growing project. The Mars 300 light spectrum will keep your plant supplied throughout its entire lifecycle, from seedling to grow. And because of its small footprint and size, you can also saddle with a small grow tent allowing you to save some bucks while you are still learning. Make sure to keep yourself updated with the prices maybe you catch an attractive discount.


MarsHydro – Reflector Series 240, 480w, 720w, 960w Review

Marshydro reflector series 480w
Model Name Actual Watts Dimensions (inch) Approximate Veg Footprint (feet) Approximate Bloom Footprint (feet) Recommended Height Latest Price
MarsHydro Reflector Series 48, 240w 60 x 5w Epistar 12 x 8 x 3 2 x 2 2 x 1.5 18 Check at Amazon
MarsHydro Reflector Series 96, 480w
MarsHydro Reflector Series 144, 720w
MarsHydro Reflector Series 192, 960w

The MarsHydro Reflector is available in 4 different models. You can get the Reflector 48, Reflector 96, Reflector 144, and Reflector 192. Each of these models refers to the number of LEDs located on a panel. Obviously, the more LEDs you have the higher your light output. This simple design allows differently sized lights to be used in conjunction with each other. If you’re just starting out, this is a great way to start small.

Construction & Design

These lights are enclosed in a space-saving panel. The bottom face of the unit is covered with a specially designed reflector that carefully shapes the light to the correct spectrum. The backs of the LEDs are connected directly to a special cooling system. It’s face-mounted design allows them to keep these panels much more compact than equivalently priced models, letting you use your grow space more effectively.

On the back, you’ve got four anchored mount points that let you string the lights up at the correct height. The exhaust fans are located on the back, as are the power inputs. This means that you’ll need to keep a little space between the top of the light panel and the ceiling. In spite of this, their thin design means that they’ll still be suitable for use in compact grow rooms.

These lights use a very thin aluminum sheet to make up the panel. Internally, they’ve got an aluminum frame that provides a little more rigidity. Each of the mounting points is anchored directly onto the frame, ensuring that they’re durable when treated correctly. While the thin paneling keeps the weight down, it does mean that they won’t hold up to much abuse. As long as you don’t drop these panels, you shouldn’t have a problem.

Visually, the lights are given an attractive light green coat of paint. They certainly stand out a little more than the more industrial looking models. If design is important to you, this is one of the few grow lights that will cater to your needs.

 

Energy Use & Efficiency

Although they are not the most power efficient LED grow lights on the market, they are still much more efficient than HIDs. The highest-end model, the Reflector192, uses 410 Watts (± 5%) at 110V. In an industrial environment, you can cut this power draw to 397W on a 220V circuit. Where light output is concerned, this light can easily replace a 450 Watt HPS/HID/MH light fixture.

If you’ve been shopping around for grow lights, you might be a little surprised at these efficiency values. Looking strictly at power draw, it appears that they are only 10% more efficient than HPS lights. The reason for this is the 5W LED lamps. They require more power to produce the same amount of light output. In an inexpensive lighting system, this is actually a good thing. When LEDs are pushed to their limit, they need complicated cooling systems to prevent them from burning out. Those cooling systems are just not possible in this price bracket. The previous generation of the Reflector series suffered from disappointing lamp life. Increasing the power rating was the best way for them to improve the longevity of these lights, without increasing the cost.

When calculating your efficiency, another thing to consider is the transformer. The transformer is one of the largest sources of power loss in LED systems. This means that a single Reflector192 will be more power efficient than four Reflector48s. While this isn’t the most power efficient design, the ability to start small and scale up is certainly financially efficient.

Most growers who are interested in the Mars Hydro Reflector series LED Grow lights will be on a tight budget. If you don’t have quite enough money for the top-level model, the smaller ones still offer great value.

Model # 5W LEDs BTU Output Power Draw HPS Equivalent
Reflector 48 48 409 BTU 102W ±5% 105W
Reflector 96 96 467 BTU 207W ±5% 250W
Reflector 144 144 706 BTU 316W ±10% 350W
Reflector 192 192 1398 BTU 415W ±10% 450W

Light Spectrum, PAR & PPF

MarsHydro Reflector ParWhen it comes to growing, not all light is equal. Some wavelengths of light don’t even produce synthesis. For this reason, we can’t compare grow lights just by measuring their light output. We have to measure the amount of usable Light output. Specifically, we’re looking for PAR, or Photosynthetically Active Radiation.

 

Now, The Mars Hydro Reflector doesn’t just blast light all over the room. To keep them efficient, reflectors are used to focus the light into a specific area. This means that the PAR values are different depending on where the light is measured from. As you can see from the diagram above, these lights produce 1200 umol of PAR at the center, slowly fading to 169 umol as you move outside of the coverage area.

These LED grow lights use a number of different spectrum LEDs in order to cover the bulk of the PAR wavelengths. They produce light from 430 to 440nm, 450~475nm 620~630nm, 650~660nm, and of course white.

Model PAR at 18 Inches Coverage at 18 Inches Panel Size
Reflector 48 477 umol 2 x 2 12 x 12 x 2
Reflector 96 680 umol 2 x 3 23 x 10 x 2
Reflector 144 873 umol 2 x 4 28 x 10 x 2
Reflector 192 1200 umol 4 x 4 26 x 21 x 2

Coverage

When you have a grow light that spreads PAR evenly over a grow area, you’ve got a lot more flexibility with your coverage area. With the Reflector series lights, you’re going to want to keep your plants away from the edges of your coverage area. Remember, the above values provide an average for the given area. Even though the Reflector 192 is really just four Reflector 48’s in the same case, you can see how much better your light output gets.

What does this mean for you? These lights are ideal for use in compact, dense grows. Because there is so much additional PAR at the center of the coverage area, the light will be better equipped to penetrate dense canopy. Another thing to consider is the number of lights you’ll be using. At a minimum, you’ll want to work with either a single Reflector 192 or four Reflector 48’s. While this is certainly a challenge, it’s by no means an obstruction. With a little creativity, anyone can put these lights to work.

 

Growth & Bloom Function

Both the type of light and the lighting schedule will need to change throughout the growth of your plant. Historically, growers have had to change out bulbs as they move from growth to bloom. Fortunately, the Reflector series lights are capable of producing the correct spectrum for both cycles.

On the side of the light, there are two switches. One is labeled growth, the other bloom. During the growth stage, you’ll need to leave only the growth switch on. During bloom, you’ll want both of them to be turned on. During the final cycle, your plants need a lot more light. For grows operations with 192 or fewer LEDs, you’re going to want to reduce the height to 12” to ensure your plants get enough PAR. Otherwise, you’ll likely have trouble flowering them.

 

Connectivity

In order to keep costs low, the Mars Hydro Reflector does not have any special remote connectivity features. They only have a single input for the power cord. If you’re looking to schedule these lights, our recommendation would be to attach the power cable to a simple light timer. The light is already incredibly inexpensive, and a timer will add very little cost to your lights.

 

Heat Reduction

Airflow design is quite simple. Two high power fans on the top pull air in through the side vents, where they pass over the cooling fins on the back of each LED light. Some grow lights are pushing their LEDs to their highest potential, requiring much higher levels of cooling. The MarsHydro Reflector isn’t pushed too hard, so cooling isn’t quite as essential. There are, however, two considerations with this design.

First, because the case is so compact, there is quite a bit of air flowing through a small space. This makes these lights a little louder than some, although the noise level is still reasonably low. If you’re setting up a very large grow room, it may be recommended to add some additional air circulation above the lights. But for less than five or six panels, the included cooling is more than adequate.

 

Quality & Warranty

When we first saw how affordable these lights were, we couldn’t help but be a little skeptical. If you do a little research, you’ll find that the original 3W version of these panels had some serious reliability problems. Fortunately, we’re happy to say that Mars Hydro handled the situation well. They replaced defective panels for their customers and upgraded the LEDs to a 5W model that will not suffer from burnout quite as easily.

Mars Hydro has a service center located in California. If you have any problems, their customer service promises to respond within 8 working hours. Should you need a repair, they’re able to complete the repair or replacement within a single working day. The lights also include a 1-year warranty, so any issues during your first year will be fully covered.

Although we didn’t have any issues with our lights, and the company appears to be responsive, it’s important to consider the price. These lights are sold at a fraction of competing models, so it’s possible that a small number of issues may arise. Fortunately, this issue is mitigated by its impressive customer service. If you’re setting up a very large project, consider purchasing an extra light as a backup. But for the average consumer, we think this is a pretty safe buy.

 

Summary of Mars Hydro Reflector led grow lights

The Good

  • A unique and remarkable design with high output in both modes veg and bloom modes.
  • Lights are cooled efficiently thanks to intake and outtake pin-cushion that allows heat to sink ensuring a longer lifespan.
  • For its size, it is extremely energy-efficient. It kind of goes unnoticed in your electric bill.

 

The Bad

  • Lighting quality is so intense that it may hurt your eyes if you look at it directly. Wearing protective glasses when working around this light is not an option but a requirement.
  • Even though it is very simple to install and use, it lacks an instruction manual which can be helpful for some details, especially for beginners.
  • There are a few details regarding design that could have been implemented better, the position of the power cord (you may need to clip it to have it off the way) for example.

Recommended for

If you’re looking for an affordable entry point into the world of LED Grow Lights, the MarsHydro is a perfect choice. Sure, they may not be quite as efficient as the top brands, but you’re still able to get a very high quality product for an impressively low price. This would be one of our first recommendations for beginners on a budget. You’ll be able to get several years of use out of them, and they don’t come with any unnecessary frills that won’t be necessary for small grows. If you’re starting up a massive grow and require reliability above all else, you may want to look at the Platinum Series Grow Lights. But if you’re tight on cash, this is the cheapest LED grow light that money can buy.


MarsHydro – Pro II Cree Series 600W & 1200w Review

Model Name Actual Watts Dimensions (inch) Approximate Veg Footprint (feet) Approximate Bloom Footprint (feet) Recommended Height Latest Price
MarsHydro Reflector Series 480w 60 x 5w Epistar 12 x 8 x 3 2 x 2 2 x 1.5 18 Check at Amazon
MarsHydro Reflector Series 720w
MarsHydro Reflector Series 960w

MarsHydro: Pro 2 Cree 640W is a big LED light with full spectrum. This light offers high intensity along with a high-quality set of fans. The diodes are from the Cree brand, designed to provide intense LED light. It needs to be at least 24 inches from the canopy, making it a good option for larger growing areas. It comes with two buttons to activate and deactivate bloom and growth modes.

The Good

  • Made and tested in the U.S.
  • Intense light provided by excellent quality diodes.
  • Good cooling system, it does not overheat.
  • Although it provides more red light, it is still a good product for vegetative stage.
  • Specialized technology to deliver uniform coverage.

The Bad

  • A little overpriced.
  • Quite heavy and big design. Though it is understandable since it is not a LED light for small growing areas.
  • High energy consumption for a LED light.

Recommended for

The MarsHydro: Pro 2 Cree 640W is a good option for people with a big canopy. It is not recommended for beginners. The design is very big and heavy, so it requires a great set of hangers. This is an expensive light. The price can be reasonable if you have an important inside growing project requiring a lot of lighting. Otherwise, many other options are more affordable than this light, especially when considered how much electric energy it consumes (costs around $25 per month when given lots of use). It has a 2-year warranty and the customer service is excellent with 8 working hours of reply service. A long-lasting solution for people seeking a big LED light for a big canopy.


MarsHydro – Eco Series 49 & 98

This Post Has One Comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close Menu